Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for Tumble Seat Type LH Side)
RM24M0E _58 Vehicle Interior _059567 SEAT _0292008 REAR NO. 1 SEAT ASSEMBLY(for Tumble Seat Type LH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for Tumble Seat Type LH Side)  INSTALLATION  


PROCEDURE

Hide 72190 1.INSTALL REAR SEAT TRACK ASSEMBLY INNER LH

a.

Install the rear seat track inner with the 4 nuts.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)


b.

Install the 2 seat track lower rail protectors.


c.
B143829

Install the 2 floor carpet mouldings and, using a screwdriver, rotate the clips clockwise to engage them.


Hide 72170 2.INSTALL REAR SEAT TRACK ASSEMBLY OUTER LH

a.

Install the rear seat track outer with the 4 nuts.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)


b.

Install the 2 seat track lower rail protectors.


c.
B143829

Install the 2 floor carpet mouldings and, using a screwdriver, rotate the clips clockwise to engage them.


Hide 3.INSTALL REAR SEAT ASSEMBLY

a.

Place the seat in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Lift up the seat track adjusting handle and move the seat to the foremost position.


c.
B143816E01
2.85,1.701 2.968,1.861 0.119,0.160 10 1 2.951,2.24 3.079,2.410 0.128,0.170 10 2

Install the 2 bolts.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)

HINT:

Tighten the bolts in the order indicated in the illustration.



d.
B462636

Attach the 3 claws on the rear side of the rear seat leg cover RH.


e.
B143610

Attach the 3 claws on the rear side of the rear seat leg cover. Then close the cover.


f.

Lift up the seat track adjusting handle and move the seat to the foremost position.


g.
B143815E01
0.423,2.668 0.547,2.833 0.124,0.165 10 1 1.075,2.988 1.203,3.146 0.128,0.159 10 2

Install the 2 bolts.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)

HINT:

Tighten the bolts in the order indicated in the illustration.



h.
B462637

Attach the 3 claws on the front side of the rear seat leg cover RH.


i.
B143612

Attach the 3 claws on the rear side of the rear seat leg cover. Then close the cover.


Hide 71940A 4.INSTALL REAR SEAT HEADREST ASSEMBLY