Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for Tumble Seat Type LH Side)
RM24M0E _58 Vehicle Interior _059567 SEAT _0292008 REAR NO. 1 SEAT ASSEMBLY(for Tumble Seat Type LH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for Tumble Seat Type LH Side)  REMOVAL  


PROCEDURE

Hide 71940A 1.REMOVE REAR SEAT HEADREST ASSEMBLY

Hide 2.REMOVE REAR NO. 1 SEAT ASSEMBLY

a.

Lift up the seat track adjusting handle and move the seat to the rearmost position.


b.
B143612

Using a screwdriver, detach the 3 claws on the rear seat cushion under cover. Then open the cover.

HINT:

Tape the screwdriver tip before use.



c.
B462637

Detach the 3 claws and remove the No. 2 seat leg cover RH.

HINT:

Tape the screwdriver tip before use.



d.
B143815

Remove the 2 bolts on the front side of the seat.


e.

Lift up the seat track adjusting handle and move the seat to the foremost position.


f.
B143610

Using a screwdriver, detach the 3 claws on the rear seat cushion under cover. Then open the cover.

HINT:

Tape the screwdriver tip before use.



g.
B462636

Detach the 3 claws and remove the No. 2 seat leg cover RH.

HINT:

Tape the screwdriver tip before use.



h.
B143816

Remove the 2 bolts on the rear side of the seat.


i.

Remove the seat.

NOTICE:

Be careful not to damage the vehicle body.



Hide 72170 3.REMOVE REAR SEAT TRACK ASSEMBLY OUTER LH

a.
B143828

Using a screwdriver, rotate the clips counterclockwise to disengage them, and remove the 2 floor carpet mouldings.


b.

Remove the 2 seat track lower rail protectors.


c.

Remove the 4 nuts and rear seat track assembly outer.


Hide 72190 4.REMOVE REAR SEAT TRACK ASSEMBLY INNER LH

a.
B143828

Using a screwdriver, rotate the clips counterclockwise to disengage them, and remove the 2 floor carpet mouldings.


b.

Remove the 2 seat track lower rail protectors.


c.

Remove the 4 nuts and rear seat track assembly inner.