72526B
1.REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH
Raise the reclining adjuster release handle to reveal the claw. Using a screwdriver, detach the claw and remove the handle.
Tape the screwdriver tip before use.
72216A
2.REMOVE SEAT TRACK HANDLE CONTROL LEVER LH
Raise the seat track handle control lever to reveal the claw. Using a screwdriver, detach the claw and remove the handle.
71849A
3.REMOVE SEAT ADJUSTER COVER CAP LH
Using a screwdriver, detach the claw and remove the cap.
Tape the screwdriver tip before use.
73390C
4.REMOVE REAR NO. 1 SEAT BELT ASSEMBLY INNER LH
71834A
5.REMOVE REAR NO. 1 SEAT RECLINING COVER LH
Remove the 2 screws.
Using a screwdriver, detach the 7 claws and remove the reclining cover.
Tape the screwdriver tip before use.
71833A
6.REMOVE REAR NO. 1 SEAT RECLINING COVER RH
Remove the 2 screws.
Using a screwdriver, detach the 6 claws and remove the reclining cover.
Tape the screwdriver tip before use.
71874B
7.REMOVE REAR NO. 1 SEAT CUSHION SHIELD LOWER LH
Remove the screw.
Detach the claw and remove the cushion shield lower LH.
71868K
8.REMOVE REAR SEAT CUSHION SHIELD LH (for LH Side)
Remove the screw.
Detach the 2 claws and remove the cushion shield LH.
9.REMOVE REAR SEAT CUSHION ASSEMBLY LH
for LH Side:
Remove the 3 bolts.
for RH Side:
Remove the bolt and bush.
Remove the seat cushion.
71867L
10.REMOVE REAR SEAT CUSHION SHIELD LH (for RH Side)
Remove the screw.
Detach the 3 claws and remove the cushion shield.
72928
11.REMOVE REAR SEAT CUSHION UNDER COVER LH
Remove the 4 screws and 2 cushions.
Remove the seat cushion under cover.
72615C
12.REMOVE REAR SEAT BACK LOCK STRIKER COVER
Using a screwdriver, detach the 3 claws and remove the cover.
Tape the screwdriver tip before use.
73316
13.REMOVE REAR SEAT BELT COVER INNER LH
Remove the 4 screws.
Remove the 2 claws and seat belt cover.
71877C
14.REMOVE REAR NO. 1 SEAT ARMREST HOLE COVER LH
Using a screwdriver, detach the 2 claws and remove the armrest hole cover.
Tape the screwdriver tip before use.
72840
15.REMOVE REAR NO. 1 SEAT ARMREST ASSEMBLY LH
Remove the bolt and armrest.
72574
16.REMOVE RECLINING CONTROL LEVER LH
Remove the 2 bolts and reclining control lever.
17.REMOVE REAR SEATBACK ASSEMBLY LH
for LH Side:
Disconnect the cable.
Remove the 2 bolts.
for RH Side:
Remove the 2 bolts.
79185
18.REMOVE NO. 1 SEATBACK PAD LH
Turn up the lower part of the seat cover and detach the 4 hog rings.
Open the fastener on the right side and turn up the seat cover.
Remove the 3 hog rings and detach the rubber band.
Detach the 4 claws and remove the 2 headrest supports.
Open the fastening tape, remove the 2 hog rings and remove the seatback cover assembly.
71876C
19.REMOVE NO. 2 RECLINING ADJUSTER INSIDE COVER LH
Remove the screw and reclining adjuster inside cover.
71875C
20.REMOVE NO. 2 RECLINING ADJUSTER INSIDE COVER RH
Remove the screw and reclining adjuster inside cover.
71876C
21.REMOVE NO. 1 RECLINING ADJUSTER INSIDE COVER LH
Remove the screw.
Detach the 2 claws and remove the reclining adjuster inside cover.
71875C
22.REMOVE NO. 1 RECLINING ADJUSTER INSIDE COVER RH
Remove the screw.
Detach the 2 claws and remove the reclining adjuster inside cover.
72690
23.REMOVE SEAT CUSHION LOCK RELEASE LEVER ASSEMBLY
Remove the 2 screws.
Disconnect the rear No. 1 seat lock cable.
Remove the seat cushion lock release lever.
71016A
24.REMOVE REAR SEAT CUSHION FRAME ASSEMBLY LH
Open the 2 fasteners and then open the seat cushion cover.
Remove the 2 cable ties.
Remove the spring and disconnect the lock cable.
79136B
25.REMOVE NO. 1 SEAT CUSHION PAD LH
Remove the 12 hog rings and rear seat cushion pad.