79136B
1.INSTALL NO. 1 SEAT CUSHION PAD LH
Be careful not to damage the cover.
When installing the hog rings, avoid wrinkling the cover.
Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.
71016A
2.INSTALL REAR SEAT CUSHION FRAME ASSEMBLY LH
Connect the lock cable and install the spring to the rear seat cushion frame.
Install the 2 cable ties.
Install the rear seat cushion frame to the rear seat cushion pad.
Turn down the seat cushion cover and close the 2 fasteners.
72690
3.INSTALL SEAT CUSHION LOCK RELEASE LEVER ASSEMBLY
Connect the rear No. 1 seat lock cable to the seat cushion lock release lever.
Install the seat cushion lock release lever with the 2 screws.
71875C
4.INSTALL NO. 1 RECLINING ADJUSTER INSIDE COVER RH
Attach the 2 claws to install the inside cover.
Install the screw.
71876C
5.INSTALL NO. 1 RECLINING ADJUSTER INSIDE COVER LH
Attach the 2 claws to install the inside cover.
Install the screw.
71875C
6.INSTALL NO. 2 RECLINING ADJUSTER INSIDE COVER RH
Install the reclining adjuster inside cover with the screw.
71876C
7.INSTALL NO. 2 RECLINING ADJUSTER INSIDE COVER LH
Install the reclining adjuster inside cover with the screw.
79185
8.INSTALL NO. 1 SEATBACK PAD LH
Install the seatback pad and seatback cover with new hog rings, and close the fastening tape.
Install the headrest support.
Attach the fastening rubbers with new hog rings as shown in the illustration.
Turn down the seatback cover and close the fastener.
Install the seatback cover with new hog rings.
9.INSTALL REAR SEATBACK ASSEMBLY LH
for RH Side:
Install the seatback with the 2 bolts.
for LH Side:
Install the seatback with the 2 bolts.
Connect the cable.
72574
10.INSTALL RECLINING CONTROL LEVER LH
Install the reclining control lever LH with the 2 bolts.
72840
11.INSTALL REAR NO. 1 SEAT ARMREST ASSEMBLY LH
Install the seat armrest with the bolt.
71877C
12.INSTALL REAR NO. 1 SEAT ARMREST HOLE COVER LH
Attach the claw to install the armrest cover.
73316
13.INSTALL REAR SEAT BELT COVER INNER LH
Attach the 2 claws to install the seat belt cover inner.
Install the 4 screws.
72615C
14.INSTALL REAR SEAT BACK LOCK STRIKER COVER
Attach the 3 claws to install the cover.
72928
15.INSTALL REAR SEAT CUSHION UNDER COVER LH
Install the seat cushion under cover with the 2 cushions and 4 screws.
71867L
16.INSTALL REAR SEAT CUSHION SHIELD LH (for RH Side)
Attach the 3 claws to install the seat cushion shield.
Install the screw.
17.INSTALL REAR SEAT CUSHION ASSEMBLY LH
for RH Side:
Install the seat cushion with the bush and bolt.
for LH Side:
Install the seat cushion with the 3 bolts.
for bolt A
for bolt B
71874B
18.INSTALL REAR SEAT CUSHION SHIELD LOWER LH
Attach the claw to install the cushion shield.
Install the screw.
71868K
19.INSTALL REAR SEAT CUSHION SHIELD LH (for LH Side)
Attach the 2 claws to install the seat cushion shield.
Install the screw.
71833A
20.INSTALL REAR NO. 1 SEAT RECLINING COVER RH
Attach the 6 claws to install the reclining cover.
Install the 2 screws.
Attach the claws in the order indicated in the illustration.
73390C
21.INSTALL REAR NO. 1 SEAT BELT ASSEMBLY INNER LH
71849A
22.INSTALL SEAT ADJUSTER COVER CAP LH
Attach the claws to install the cap.
71834A
23.INSTALL REAR NO. 1 SEAT RECLINING COVER LH
Attach the 7 claws to install the reclining cover.
Install the 2 screws.
Attach the claws in the order indicated in the illustration.
72216A
24.INSTALL SEAT TRACK HANDLE CONTROL LEVER LH
Attach the claw to install the seat track handle control lever.
72526B
25.INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH
Attach the claw to install the reclining adjuster release handle.