Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for Tumble Seat Type RH Side)
RM24M0E _58 Vehicle Interior _059567 SEAT _0292009 REAR NO. 1 SEAT ASSEMBLY(for Tumble Seat Type RH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for Tumble Seat Type RH Side)  INSTALLATION  


PROCEDURE

Hide 72160 1.INSTALL REAR SEAT TRACK ASSEMBLY OUTER RH

a.

Install the seat track outer with the 4 nuts.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)


b.

Install the 2 seat track lower rail protectors.


c.
B143829

Install the 2 floor carpet mouldings and, using a screwdriver, rotate the clips clockwise to engage them.


Hide 72180 2.INSTALL REAR SEAT TRACK ASSEMBLY INNER RH

a.

Install the seat track inner with the 4 nuts.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)


b.

Install the 2 seat track lower rail protectors.


c.
B143829

Install the 2 floor carpet mouldings and, using a screwdriver, rotate the clips clockwise to engage them.


Hide 3.INSTALL REAR SEAT ASSEMBLY RH

a.

Place the seat in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Lift up the seat track adjusting handle and move the seat to the foremost position.


c.
B146447E01
3.057,1.684 3.185,1.833 0.128,0.149 10 1 3.052,2.333 3.174,2.503 0.121,0.170 10 2

Install the 2 bolts.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)

HINT:

Tighten the bolts in the order indicated in the illustration.



d.
B146264

Attach the 3 claws on the rear seat cushion under cover. Then close the 2 covers.


e.

Lift up the seat track adjusting handle and move the seat to the rearmost position.


f.
B143826E01
1.115,3 1.218,3.177 0.103,0.177 10 1 0.283,2.586 0.392,2.756 0.110,0.170 10 2

Install the 2 bolts.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)

HINT:

Tighten the bolts in the order indicated in the illustration.



g.
B146264

Attach the 3 claws on the rear seat cushion under cover. Then close the 2 covers.


Hide 71960B 4.INSTALL REAR SEAT HEADREST ASSEMBLY CENTER

Hide 71940A 5.INSTALL REAR SEAT HEADREST ASSEMBLY