Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for Tumble Seat Type RH Side)
RM24M0E _58 Vehicle Interior _059567 SEAT _0292009 REAR NO. 1 SEAT ASSEMBLY(for Tumble Seat Type RH Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for Tumble Seat Type RH Side)  REMOVAL  


PROCEDURE

Hide 71940A 1.REMOVE REAR SEAT HEADREST ASSEMBLY

Hide 71960B 2.REMOVE REAR SEAT HEADREST ASSEMBLY CENTER

Hide 3.REMOVE REAR SEAT ASSEMBLY RH

a.

Lift up the seat track adjusting handle and move the seat to the rearmost position.


b.
B462512

Using a screwdriver, detach the 3 claws on the rear seat cushion under cover. Then open the 2 covers.

HINT:

Tape the screwdriver tip before use.



c.
B143826

Remove the 2 bolts on the front side of the seat.


d.

Lift up the seat track adjusting handle and move the seat to the foremost position.


e.
B462513

Using a screwdriver, detach the 3 claws on the rear seat cushion under cover. Then open the 2 covers.

HINT:

Tape the screwdriver tip before use.



f.
B146447

Remove the 2 bolts on the rear side of the seat.


g.

Remove the seat.

NOTICE:

Be careful not to damage the vehicle body.



Hide 72180 4.REMOVE REAR SEAT TRACK ASSEMBLY INNER RH

a.
B143828

Using a screwdriver, rotate the clips counterclockwise to disengage them, and remove the 2 floor carpet mouldings.


b.

Remove the 2 seat track lower rail protectors.


c.

Remove the 4 nuts and rear seat track.


Hide 72160 5.REMOVE REAR SEAT TRACK ASSEMBLY OUTER

a.
B143828

Using a screwdriver, rotate the clips counterclockwise to disengage them, and remove the 2 floor carpet mouldings.


b.

Remove the 2 seat track lower rail protectors.


c.

Remove the 4 nuts and rear seat track.