WIRELESS DOOR CONTROL SYSTEM DESCRIPTION
This system locks and unlocks the vehicle's doors remotely. The wireless control system has the following features:
The certification ECU performs the code identification procedure and the main body ECU operates the door lock control. A serial data link is provided for communication between the certification ECU and main body ECU.
A key-integrated type transmitter is used and it contains the following 5 switches: the door lock switch, door unlock switch, power slide door open switch, power slide door closer switch and power back door control switch.
An LED is built into the transmitter so that the battery status can be checked.
FUNCTION OF MAIN COMPONENTS
| Components | Functions |
|---|---|
| Door control transmitter | ·
Contains LOCK, UNLOCK, power slide door open switch, power slide door closer switch and power back door control switches ·
Transmits faint electric waves (recognition codes and function codes) to door control receiver ·
Illuminates indicator light (LED) during transmission |
| Door control receiver | Receives weak electric waves (recognition codes and function codes) from door control transmitter, and changes waves to code data |
| Certification ECU | Matches code data with registered code and outputs code data to main body ECU |
| Door lock position switch | Transmits door lock conditions of each door to main body ECU |
| Front door courtesy light switch LH, RH
Slide door courtesy light switch LH, RH Back door courtesy light switch |
Turns ON when door is open and turns OFF when door is closed. Outputs door status (open or closed) to main body ECU. |
SYSTEM FUNCTION
Door lock / unlock function:
With the ignition switch off and all door courtesy light switches OFF, pressing the door control transmitter's LOCK / UNLOCK switch causes the transmitter to output faint electric waves. The transmitter sends a faint electrical wave to the door control receiver. The high frequency circuit built into the door control receiver demodulates the wave into code data, computes the data, and compares the data with previously registered ID codes. If the data is verified, a door lock / unlock request signal is output to the main body ECU. When the request signal is received, the main body ECU outputs a door lock / unlock control signal to each door lock. Each door lock then locks / unlocks its respective door and turns ON / OFF its door lock position switch in accordance with the signal.
Answer-back function:
The main body ECU receives the door unlock detection switch's ON / OFF signals and uses these signals to confirm if the door control operation has been completed. The main body ECU then outputs the hazard warning light control signals to flash the hazard warning lights, and wireless door lock buzzer control signals to sound the wireless door lock buzzer as an answer-back indication.
The wireless door lock control system has the following functions:
| Function | Outline |
|---|---|
| All door lock function | Pressing LOCK switch locks all doors |
| All door unlock function | Pressing UNLOCK switch unlocks all doors |
| Answer-back function | Hazard warning lights flash once and wireless door lock buzzer sounds once when doors are locked, and hazard warning lights flash twice and wireless door lock buzzer sounds twice when doors are unlocked to indicate that operation has been completed |
| Automatic locking function | If no doors are opened within 30 seconds after being unlocked by wireless transmitter, all doors are locked again automatically |
| Illuminated entry function | If locked doors are unlocked through wireless operation, dome light illuminates. If one of following situations occurs, light fades out:
·
Within 15 seconds, doors are not opened and doors are locked through wireless operation ·
No operations or actions are performed within 15 seconds |