CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
| Display (Item) | Default | Contents | Setting |
|---|---|---|---|
| Hazard Ans Back | ON | When wireless lock switch on transmitter pressed, all hazard warning lights illuminate once. When unlock switch pressed, all hazard warning lights illuminate twice | ON / OFF |
| Wireless Oper | ON | ON /OFF of wireless door lock function | ON / OFF |
| Auto Lock Delay | 30 seconds | Time until relocking after unlocking with wireless door lock function | 60 seconds / 30 seconds |
| Open Door Warn | ON | If door not completely closed and transmitter LOCK switch pressed, this function makes buzzer sound for 5 seconds | ON / OFF |
| Wirls Buzz Resp | ON | ON / OFF of wireless buzzer response function | ON / OFF |
CUSTOMIZING USING THE MULTI-DISPLAY
Turn the engine switch on (IG).
Enter the following menus: SETUP / Vehicle / Vehicle customization / Door Lock Settings.
Select the setting by referring to the table below.
| Display (Item) | Default | Contents | Setting |
|---|---|---|---|
| Lock/unlock feedback-lights | On | When wireless lock switch on transmitter pressed, all hazard warning lights illuminate once. When unlock switch pressed, all hazard warning lights illuminate twice | On or Off |