Customizing with the GTS
The following items can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Customize Setting / Wireless Door Lock.
Select the setting by referring to the table below.
| Display (Item) | Default | Contents | Setting |
|---|---|---|---|
| Hazard Answer Back | ON | When wireless lock switch on transmitter pressed, all hazard warning lights illuminate once. When unlock switch pressed, all hazard warning lights illuminate twice | ON / OFF |
| Wireless Control | ON | ON /OFF of wireless door lock function | ON / OFF |
| Auto Lock Time | 30 seconds | Time until relocking after unlocking with wireless door lock function | 60 seconds / 30 seconds |
| Open Door Warning | ON | If door not completely closed and transmitter LOCK switch pressed, this function makes buzzer sound for 5 seconds | ON / OFF |
| Wireless Buzzer Resp* | ON | ON / OFF of wireless buzzer response function | ON / OFF |
*: w/ Wireless Door Lock Buzzer Answer-back Function
CUSTOMIZING USING THE MULTI-DISPLAY
Turn the engine switch on (IG).
Enter the following menus: SETUP / Vehicle / Vehicle customization / Door Lock Settings.
Select the setting by referring to the table below.
| Display (Item) | Default | Contents | Setting |
|---|---|---|---|
| Lock/unlock feedback-lights | On | When wireless lock switch on transmitter pressed, all hazard warning lights illuminate once. When unlock switch pressed, all hazard warning lights illuminate twice | On or Off |