Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM
RM24M0E _58 Vehicle Interior _059568 DOOR LOCK _0292011 POWER DOOR LOCK CONTROL SYSTEM J

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  Power Window Master Switch Circuit  


DESCRIPTION

The door control switch is built into the multiplex network master switch. The main body ECU receives the signals to lock / unlock all doors from multiplex network regulator master switch via LIN communication.

WIRING DIAGRAM

B138818E01
1.26,2.094 3.055,2.444 1.795,0.350 10 Multiplex Network Regulator Master Switch 4.779,2.117 5.831,2.270 1.052,0.154 10 Main Body ECU 2.106,1.069 2.462,1.228 0.356,0.159 10 LIN1 4.871,1.069 5.227,1.228 0.356,0.159 10 LIN2 4.766,1.944 5.122,2.103 0.356,0.159 10 G59 1.26,1.941 1.617,2.100 0.356,0.159 10 J3 4.558,0.962 4.768,1.121 0.211,0.159 10 10 2.536,0.962 2.746,1.121 0.211,0.159 10 17

PROCEDURE

1.CHECK FOR DTC
a.

Delete the DTC.


b.

Check for the DTC.

Result:
Result Proceed to
DTC does not occur A
DTC (B2325) reoccurs B




A

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE

B

GO TO POWER WINDOW CONTROL SYSTEM