POWER DOOR LOCK SYSTEM DESCRIPTION
The power door lock system locks / unlocks all doors with a one-touch operation.
The door control switch of the power window regulator master switch sends lock / unlock request signals to the main body ECU. Then, the main body ECU sends these requests to the lock motors in each door to lock / unlock all the doors simultaneously.
COMPONENTS
| Components | Functions |
|---|---|
| Door control switch on multiplex network regulator master switch | Locks / unlocks all doors |
| Door courtesy switch | ·
Placed on each door. ·
Detects door status (open or closed) and outputs data to main body ECU. ·
Turns on when door is open and off when door is closed. |
| Driver door lock
Slide door lock Back door lock |
·
Built-in motor locks / unlocks door. ·
Built-in position switch detects door status (locked or unlocked) and outputs data to main body ECU. This switch turns off when door is locked and on when door is unlocked. |
| Front passenger door lock | ·
Built-in motor locks / unlocks door. ·
Built-in position switch detects door status (locked or unlocked) and outputs data to main body ECU. This switch turns off when door is locked and on when door is unlocked.* |
*: w/ Power Slide Door System and Power Back Door System
FUNCTIONS
This system is controlled by the main body ECU. The main body ECU outputs signals to each door lock motor. The door lock control system in the vehicle has the following functions:
| Functions | Outlines |
|---|---|
| Key lock-in prevention function | When key is inserted in ignition key cylinder and door lock operation is performed, all doors are unlocked |
| Manual unlock prohibition function | Performing door lock operation with transmitter disables unlock operation by door control switch |