READ DATA LIST
Using the intelligent tester's Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Read the Data List on the tester's screen.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| D Door Courtesy SW | Driver side door courtesy light switch signal / ON or OFF | ON: Driver side door is open
OFF: Driver side door is closed |
- |
| D-Door Lock Pos SW | Driver side door lock position switch signal / ON or OFF | ON: Driver side door is unlocked
OFF: Driver side door is locked |
- |
| Door Key SW-Lock | Door key linked lock switch signal / ON or OFF | ON: Driver side door key cylinder is turned to lock position
OFF: Driver side door key cylinder is not turned |
- |
| Door Key SW-Unlock | Door key linked lock switch signal / ON or OFF | ON: Driver side door key cylinder is turned to unlock position
OFF: Driver side door key cylinder is not turned |
- |
| P Door Courtesy SW | Passenger side door courtesy light signal / ON or OFF | ON: Passenger side door is open
OFF: Passenger side door is closed |
- |
| P-Door Lock Pos SW | Passenger side door lock position switch signal / ON or OFF | ON: Passenger side door is unlocked
OFF: Passenger side door is locked |
- |
| RR Door Courtesy SW | Slide door RH courtesy light switch signal / ON or OFF | ON: Slide door RH is open
OFF: Slide door RH is closed |
- |
| RR-Door Lock Pos SW | Slide door RH lock position switch signal / ON or OFF | ON: Slide door RH is unlocked
OFF: Slide door RH is locked |
- |
| RL Door Courtesy SW | Slide door LH courtesy light switch signal / ON or OFF | ON: Slide door LH is open
OFF: Slide door LH is closed |
- |
| RL-Door Lock Pos SW | Slide door LH lock position switch signal / ON or OFF | ON: Slide door LH is unlocked
OFF: Slide door LH is locked |
- |
| Back Door Courtesy SW | Back door courtesy light switch signal / ON or OFF | ON: Back door is open
OFF: Back door is closed |
- |
| Key Unlock Warning SW | Unlock warning switch signal / ON or OFF | ON: Key is in ignition key cylinder
OFF: No key is in ignition key cylinder |
- |
| Back Door Open | PERMIT / PROHIBIT | PERMIT: Back door open available
PROHIBIT: Back door open unavailable |
- |
| Back Door Open SW | ON / OFF | ON: Back door opener switch is on
OFF: Back door opener switch is off |
- |
| IG SW | ON / OFF | ON: Ignition switch is on (IG)
OFF: Ignition switch is off |
- |
| ACC SW | ON / OFF | ON: Ignition switch is on (ACC)
OFF: Ignition switch is off |
- |
PERFORM ACTIVE TEST
Performing the intelligent tester's Active Test allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Perform the Active Test according to the display on the tester.
| Tester Display | Test Part | Control Range |
|---|---|---|
| DOOR LOCK | Operate door lock motor
LOCK / UNLOCK |
- |
| Shock Detection Unlock | Operate door lock motor
LOCK / UNLOCK |
- |