1.REMOVE TRANSMITTER BATTERY
Push the release hook knob in the direction indicated by the arrow in the illustration. Pull the emergency key out of the transmitter.
Using a screwdriver, remove the transmitter cover.
Tape the screwdriver tip before use.
Do not forcibly pry the cover.
Remove the battery (lithium battery: CR1632).
Do not push the terminals with your finger.
Do not forcibly pry up the battery (lithium battery: CR1632). The terminals may be damaged.
Do not touch the battery with wet hands. Water may cause rust.
Do not touch or move any components inside the transmitter, as this may interfere with its proper operation.