Home › Vehicle Interior › DOOR LOCK › SMART ENTRY AND START SYSTEM
RM24M0E _58 Vehicle Interior _059568 DOOR LOCK _0292017 SMART ENTRY AND START SYSTEM D

DOOR LOCK  SMART ENTRY AND START SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)


HINT:

The items in the table below can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



Smart entry and start system
Display (Item) Default Contents Setting
Park Wait Time
(Waiting time to permit opening door after locking)
3.0 s Function that sets waiting time to permit opening door after door is locked with entry lock function 1.0 s / 2.0 s / 3.0 s / 5.5 s
Back Door Oper
(Back door opening operation when vehicle is locked)
LONG Function that makes back door lock, unlock switch operation available LONG / TWICE / OFF
Key Lo-Batt Wrn
(Warns when key battery becomes weak)
ON Function that warns driver that key's battery power is low ON / OFF
Ignition Area
(Entry ignition available area)
ALL Function to choose available area for key to start engine and cancel steering lock FRONT / ALL*

HINT:

*: "FRONT" means front and rear, and "ALL" means front, rear and back door.



KEY CANCEL


The key cancel operation disables the following functions:

·

Entry ignition

·

Entry unlock / lock function

·

Entry back door open function

·

Key lock-in prevention function

·

Warning function


a.

The operation procedures are as follows:

Precondition:

Ignition switch off, driver side door closed and unlocked

i.

Press the key's UNLOCK switch once.


ii.

Open the driver door within 5 seconds.


iii.

Within 5 seconds of completing the previous step, press the key's UNLOCK switch twice.


iv.

Repeat open → close twice for the driver door within 30 seconds, and open again.

(Driver door: Open → Close → Open → Close → Open)


v.

Within 5 seconds of completing the previous step, press the key's UNLOCK switch twice.


vi.

Repeat open → close once for the driver door within 30 seconds, and open again.

(Driver door: Open → Close → Open)


vii.

Close the driver door within 5 seconds.

When key cancel is activated, the wireless door lock buzzer sounds twice.

To return to the original condition, perform the procedures again. When the original condition is returned, the wireless door lock buzzer sounds once.