Each of the smart entry and start system's warnings use the warning buzzer in the combination meter to alert the driver.
The combination meter repeatedly sounds the warning buzzer when one of the following occurs: 1) the activation conditions for the smart entry and start system warning are met, or 2) the certification ECU sends a warning buzzer signal via the CAN communication line to the combination meter (meter ECU).
Check that the engine starts.
The engine starts when the correct warning buzzer signal is transmitted from the steering lock ECU to the combination meter.
| Result | Proceed to |
|---|---|
| Engine does not start (for 2AZ-FE) | A |
| Engine does not start (for 2GR-FE) | B |
| Engine starts | C |
C
A
B
Place the door control transmitter in an undetectable area outside the vehicle, and turn the ignition switch on (IG) with all doors closed.
Warning buzzer sounds once.
OK
NG
(See pageVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING)