CHECK DTC
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Select the following menu items: Body / Power Back Door ECU / DTC.
Check DTCs and then write them down.
Refer to the intelligent tester operator's manual for further details.
Confirm the details of the DTCs.
CLEAR DTC
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Select the following menu items: Body / Power Back Door ECU / DTC.
Refer to the intelligent tester operator's manual for further details.
Erase DTCs by pressing the YES button on the tester.