READ DATA LIST
Using the intelligent tester's Data List allows switch, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Read the Data List in accordance with the display on the tester.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Courtesy SW | Back door courtesy light switch signal / ON or OFF | ON: Back door is open
OFF: Back door is closed |
- |
PERFORM ACTIVE TEST
Performing the intelligent tester's Active Test allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Perform the Active Test according to the display on the tester.
| Tester Display | Test Part | Control Range |
|---|---|---|
| PBD Motor | Power back door motor ON / OFF | - |