Home › Vehicle Interior › ENGINE HOOD / DOOR › POWER SLIDE DOOR SYSTEM › 2013.04–2016.05
RM24M0E _58 Vehicle Interior _059569 ENGINE HOOD / DOOR _0292019 POWER SLIDE DOOR SYSTEM D

ENGINE HOOD / DOOR  POWER SLIDE DOOR SYSTEM  SYSTEM DESCRIPTION  


POWER SLIDE DOOR DESCRIPTION


·

The power slide door system automatically opens and closes the right and left slide doors by using the power slide door control switch or inside/outside door handle operation.

·

This system is controlled by the power slide door ECU, which is built into the power slide door motor.



COMPONENTS


Components Function
Power Slide Door Motor Unit The power slide door ECU, which is built into the power slide door motor, receives the signals from the main body ECU and the switches. Then, this unit automatically opens or closes the slide door by actuating the power slide door motor in accordance with the operation request signal received from the power slide door ECU.
Power Slide Door Lock Release Motor Releases the latch of the power slide door remote control when the power slide door switch or transmitter is operated.
Power Slide Door Lock Remote Control Actuates the built-in door lock control motor forward or backward to lock or unlock the slide door.
Power Slide Door Front Lock Releases or locks the latch in front of the slide door.
Half Open Stopper Restricts the operation of the stopper or controls the operation of the power slide operation of the slide door while the fuel lid or power window is open.
Full-open Stopper The interlock type full-open stopper prevents the slide door from closing accidentally by its own weight when the vehicle is parked on a slope.
Touch Sensor Detects the presence of a jammed object while the slide door is moving in the closing direction.
Power Supply Equipment Unit Provides continuous power to the various units in the power slide door system.
Power Slide Door Main Switch (PWR DOOR OFF Switch) Turn the power slide door system and power back door system ON / OFF.
Power Slide Door Control Switch (satellite switch)*1 Opens and closes the slide door.
Power Slide Door Control Switch LH*2 Opens and closes the slide door LH for RHD vehicles.
Slide Door Handle (Inside / Outside) Transmits slide door opening and closing signals to the power slide door ECU.
Transmitter Transmits slide door opening and closing signals to the wireless door control receiver.
Door Control Receiver Receives slide door opening and closing signals from the transmitter.
Main Body ECU Receives slide door open and close signals from the door control receiver and outputs them to the power slide door ECU.

*1: w/ Power Slide Door RH

*2: w/o Power Slide Door RH



FUNCTIONS


Function Outline
Auto Open-and-close Enables the slide door to open or close automatically through the operation of the following switch:
·

Power slide door control switch

·

Transmitter

·

Inside or outside slide door handle


Touch Sensor Protection If the touch sensor that is provided at the front end of the slide door becomes compressed while the slide door is moving in the closing direction, the resistance of the sensor changes. This change in resistance is output to the power slide door ECU to detect the presence of a jammed object.
In addition, the power slide door ECU detects the presence of a jammed object when it detects a change in the moving speed of a slide door (by monitoring the motor speed).
Continuous Power Supply System The adoption of the continuous power supply system for the slide door makes the junction power supply relay unnecessary, resulting in a simpler system.