Home › Vehicle Interior › ENGINE HOOD / DOOR › SLIDE DOOR CLOSER SYSTEM
RM24M0E _58 Vehicle Interior _059569 ENGINE HOOD / DOOR _0292020 SLIDE DOOR CLOSER SYSTEM D

ENGINE HOOD / DOOR  SLIDE DOOR CLOSER SYSTEM  OPERATION CHECK  


CHECK BASIC OPERATION


a.

Check that the motor operates to close the slide door to the fully locked position when the door is partially opened.


b.

After performing the check above, check that the slide door operates to open normally.


c.

Partially open the slide door, and then check that the motor stops operating after it rotates in reverse if the outside handle or inside handle is pulled while the motor is rotating normally


d.

Partially open the slide door, and then check that the motor stops operating if the outside handle or inside handle is pulled while the motor is rotating in reverse.


e.

Check that the motor does not operate if the outside handle or inside handle is pulled immediately after partially opening the slide door (motor is not operating).