Home › Vehicle Interior › ENGINE HOOD / DOOR › POWER SLIDE DOOR CONTROL SWITCH › 2013.04–2016.05
RM24M0E _58 Vehicle Interior _059569 ENGINE HOOD / DOOR _0292021 POWER SLIDE DOOR CONTROL SWITCH G

ENGINE HOOD / DOOR  POWER SLIDE DOOR CONTROL SWITCH  INSPECTION  


PROCEDURE

Hide 84930 1.INSPECT POWER SLIDE DOOR CONTROL SWITCH (SATELLITE SWITCH) (w/ Power Slide Door RH)

a.
B220772E01
0.722,3.637 0.851,3.779 0.128,0.142 10 E 1.35,3.637 1.711,3.802 0.362,0.165 10 CSW 2.261,3.637 2.733,3.802 0.473,0.165 10 CSW*1 1.325,3.11 0.8,3.637 false 1.653,3.112 1.539,3.637 false 1.827,3.11 2.51,3.637 false 0.585,4.066 2.324,4.222 1.739,0.156 10 *1: w/ Power Slide Door LH

Measure the resistance of the switch.

Standard resistance:
Tester Connection Condition Specified Condition
4 (CSW) - 7 (E)*1 Power slide door control switch LH side pushed Below 1 Ω
4 (CSW) - 7 (E)*1 OFF 10 kΩ or higher
5 (CSW) - 7 (E) Power slide door control switch RH side pushed Below 1 Ω
5 (CSW) - 7 (E) OFF 10 kΩ or higher


*1: w/ Power Slide Door LH


If the result is not as specified, replace the switch.



Hide 84963 2.INSPECT POWER SLIDE DOOR CONTROL SWITCH LH (w/o Power Slide Door RH)

a.
B142339E01
0.059,2.042 0.576,2.216 0.517,0.174 10 Pushed 1.044,2.589 1.561,2.764 0.517,0.174 10 Pushed 0.07,3.125 0.393,3.309 0.323,0.184 10 OFF

Inspect the resistance of the switch.

Standard resistance:
Terminal No. Condition Specified Condition
9 - 6 OFF 10 kΩ or higher
9 - 6 Pushed Below 1 Ω


If the result is not as specified, replace the switch.