Home › Vehicle Interior › ENGINE HOOD / DOOR › HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD)
RM24M0E _58 Vehicle Interior _059569 ENGINE HOOD / DOOR _0292027 HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD) A

ENGINE HOOD / DOOR  HOOD LOCK CONTROL CABLE ASSEMBLY(for RHD)  REMOVAL  


PROCEDURE

Hide 28800 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


Hide 53289A 2.REMOVE RADIATOR SUPPORT OPENING COVER

Hide 53510 3.REMOVE HOOD LOCK ASSEMBLY

B136911

a.

w/ Hood Courtesy Switch:

Disconnect the connector.


b.

Remove the 3 bolts.


c.
B136912

Disconnect the cable and remove the lock.


Hide 53601 4.REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.
B136918

Detach the 3 claws and remove the lever.


b.

Disconnect the cable.


Hide 53630 5.REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY

a.

Remove the cable from the clamps, wire harness protector and wire harness grommet as shown in the illustration.

B136919E02
1.229,1.792 0.771,0.5 0.771,0.5 0.927,0.5 false 3.76,1.854 3.938,0.74 3.938,0.74 4.094,0.74 false 5.854,1.479 6.042,2.073 false 1.604,7.76 1.813,8.458 1.813,8.458 1.958,8.458 false 4.438,4.542 4.615,7.115 false 0.958,0.448 1.448,0.625 0.49,0.177 10 false Cable 4.125,0.667 4.615,0.844 0.49,0.177 10 false Cable 5.906,2.083 6.396,2.26 0.49,0.177 10 false Cable 1.99,8.385 2.479,8.563 0.49,0.177 10 false Cable 3.875,7.156 5.531,7.333 1.656,0.177 10 false Hood Lock Control Cable