Home › Vehicle Interior › ENGINE HOOD / DOOR › HOOD LOCK CONTROL CABLE ASSEMBLY(for LHD)
RM24M0E _58 Vehicle Interior _059569 ENGINE HOOD / DOOR _0292028 HOOD LOCK CONTROL CABLE ASSEMBLY(for LHD) A

ENGINE HOOD / DOOR  HOOD LOCK CONTROL CABLE ASSEMBLY(for LHD)  REMOVAL  


PROCEDURE

Hide 28800 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


Hide 53289A 2.REMOVE RADIATOR SUPPORT OPENING COVER

Hide 53510 3.REMOVE HOOD LOCK ASSEMBLY

B136916

a.

w/ Hood Courtesy Switch:

Disconnect the connector.


b.

Remove the 3 bolts.


c.
B136917

Disconnect the cable and remove the lock.


Hide 53601 4.REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.
B136913

Detach the 3 claws and remove the lever.


b.

Disconnect the cable.


Hide 53630 5.REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY

a.

Remove the cable from the clamps, wire harness protector and wire harness grommet as shown in the illustration.

B136914E02
1.333,7.469 1.604,8.208 false 3.427,7.354 3.688,8.167 false 5.177,6.938 5.542,7.667 false 4.26,1.594 5.073,1.594 false 2.938,4.76 1.969,0.344 1.969,0.344 2.25,0.344 false 2.292,0.271 3.99,0.427 1.698,0.156 10 false Hood Lock Control Cable 5.125,1.521 5.656,1.688 0.531,0.167 10 false Cable 1.396,8.229 1.927,8.417 0.531,0.188 10 false Cable 3.479,8.188 3.979,8.365 0.5,0.177 10 false Cable 5.344,7.677 5.844,7.854 0.5,0.177 10 false Cable