CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)
The following item can be customized.
When the customer requests a change in a function, first make sure that the function can be customized.
Make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
| Display (Item) | Default | Function | Setting |
|---|---|---|---|
| PBD SW Operation | 0.8 s | Function that turns power back door closer switch ON when switch is pushed once or held down for 0.8 sec. | 0.8s / ON |
| PBD Buzzer | ON | This function makes the power back door buzzer sound when power back door operating | ON / OFF |
| Wirels PBD SW Operation | 0.8 s | Function that operates power back door when transmitter switch is pressed in specified way (1-press, 2-presses, 0.8 sec.- press or OFF) | ON / 2 times / 0.8 s / OFF |