On the RH side, use the same procedures as on the LH side.
68960
1.DISPOSE OF BACK DOOR STAY ASSEMBLY LH
Horizontally fix the stay in a vise with the piston-rod pulled out.
Wearing safety glasses, gradually cut a part between A and B as shown in the illustration using a metal saw to gradually release the gas.
| a |
|---|
| 100 mm (3.94 in.) |
Although the gas inside the damper stay is colorless, odorless and harmless, there is a possibility that metal debris from cutting could enter the assembly. Therefore, cover it with cloth or something similar.