Home › Vehicle Interior › ENGINE HOOD / DOOR › BACK DOOR OPENER SWITCH
RM24M0E _58 Vehicle Interior _059569 ENGINE HOOD / DOOR _0292037 BACK DOOR OPENER SWITCH G

ENGINE HOOD / DOOR  BACK DOOR OPENER SWITCH  INSPECTION  


PROCEDURE

Hide 84840G 1.INSPECT BACK DOOR OPENER SWITCH

B142343E01
1.975,1.313 2.562,1.502 0.586,0.188 10 Pushed 1.975,2.018 2.784,2.206 0.809,0.188 10 Not Pushed 1.694,4.29 1.878,4.459 0.184,0.170 10 E 1.153,4.29 1.378,4.473 0.225,0.184 10 UL 1.737,3.843 1.737,4.26 false 1.475,3.847 1.267,4.26 false

a.

Measure the resistance of the switch.

Standard resistance:
Tester Connection Condition Specified Condition
2 (E) - 3 (UL) Not pushed 10 kΩ or higher
2 (E) - 3 (UL) Pushed Below 1 Ω


If the result is not as specified, replace the switch assembly.