Home › Engine / Hybrid System › 2GR-FE STARTING › PUSH-BUTTON START › from 2016.05
RM24M0E _51 Engine / Hybrid System _059574 2GR-FE STARTING _0292073 PUSH-BUTTON START J

2GR-FE STARTING  PUSH-BUTTON START  Entry Interior Alarm does not Sound  


DESCRIPTION

Each of the push-button start's warnings use the warning buzzer in the combination meter to alert the driver.

The combination meter repeatedly sounds the warning buzzer when one of the following occurs: 1) the activation conditions for the push-button start warning are met, or 2) the certification ECU sends a warning buzzer signal via the CAN communication line to the combination meter (meter ECU).

WIRING DIAGRAM

U185975E02
0.177,2.135 0.583,2.344 0.406,0.208 10 false G28 5.469,2.188 5.802,2.365 0.333,0.177 10 false G29 5.469,1.635 5.885,1.823 0.417,0.188 10 false CANH 5.469,0.635 5.885,0.823 0.417,0.188 10 false CANL 1.344,1.635 1.76,1.823 0.417,0.188 10 false CANH 1.344,0.635 1.76,0.823 0.417,0.188 10 false CANL 1.865,0.76 2.083,0.948 0.219,0.188 10 false 31 1.865,1.74 2.083,1.927 0.219,0.188 10 false 32 5.156,0.76 5.375,0.948 0.219,0.188 10 false 28 5.156,1.75 5.375,1.938 0.219,0.188 10 false 27 3.292,1.646 3.969,1.813 0.677,0.167 10 false CAN Line 3.292,0.635 3.969,0.802 0.677,0.167 10 false CAN Line 0.177,2.302 2.167,2.5 1.99,0.198 10 false Combination Meter (Meter ECU) 5.458,2.354 6.792,2.531 1.333,0.177 10 false Certification ECU

PROCEDURE

1.CHECK WHETHER ENGINE STARTS
a.

Check that the engine starts.

HINT:

The engine starts when the correct warning buzzer signal is transmitted from the steering lock ECU to the combination meter.


OK:

Engine can be started.




OK

2.CHECK COMBINATION METER ASSEMBLY (OPERATION)

NG

GO TO OTHER PROBLEM (Engine does not Start)

2.CHECK COMBINATION METER ASSEMBLY (OPERATION)
a.

Place the door control transmitter in an undetectable area outside the vehicle, and turn the engine switch on (IG) with all doors closed.

OK:

Warning buzzer sounds once.




OK

REPLACE CERTIFICATION ECU

NG