1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2.DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL
53292A
3.REMOVE UPPER RADIATOR SUPPORT SEAL
74404B
4.REMOVE BATTERY CLAMP
Remove the bolt and loosen the nut.
Detach the 2 wire harness clamps.
Detach the hook of the battery clamp from the front battery bracket, and then remove the battery clamp.
28899
5.REMOVE BATTERY INSULATOR
28800
6.REMOVE BATTERY
74431
7.REMOVE BATTERY TRAY
74411
8.REMOVE FRONT BATTERY BRACKET
Detach the 2 wire harness clamps.
Remove the 5 bolts and front bracket.
74414D
9.REMOVE BATTERY BRACKET REINFORCEMENT
Remove the 2 bolts and bracket reinforcement.
28100
10.REMOVE STARTER ASSEMBLY
Disconnect the starter connector.
Open the terminal cap, remove the nut and disconnect the starter wire.
Remove the 2 bolts and starter.