Home › Engine / Hybrid System › 2AZ-FE STARTING › STARTER(for 1.6 kW Type)
RM24M0E _51 Engine / Hybrid System _059575 2AZ-FE STARTING _0292078 STARTER(for 1.6 kW Type) A

2AZ-FE STARTING  STARTER(for 1.6 kW Type)  DISASSEMBLY  


PROCEDURE

Hide 28226B 1.REMOVE MAGNETIC SWITCH ASSEMBLY

a.
A079718

Remove the nut and disconnect the lead wire from the magnetic switch.


b.
A079719

Remove the 2 screws holding the magnetic switch to the starter drive housing.


c.

Remove the magnetic switch.


d.

Remove the return spring and plunger from the starter drive housing.


Hide 28120 2.REMOVE STARTER YOKE ASSEMBLY

a.
A079720

Remove the 2 through-bolts, and pull out the starter yoke together with the commutator end frame.


b.
A079721

Remove the starter yoke from the commutator end frame.


Hide 28177 3.REMOVE STARTER ARMATURE PLATE

a.
A079722

Remove the armature plate from the starter yoke.


Hide 28132A 4.REMOVE STARTER COMMUTATOR END FRAME COVER

a.
A079723

Using a screwdriver, pry out the commutator end frame cover.


Hide 28160 5.REMOVE STARTER ARMATURE ASSEMBLY

a.
A082440E31
1.594,0.677 1.125,0.281 1.125,0.281 0.969,0.281 false 0.125,0.156 0.833,0.5 0.708,0.344 10 false Snap Ring Pliers

Using snap ring pliers, remove the snap ring and plate washer.


b.

Remove the armature from the commutator end frame.


Hide 28255 6.REMOVE PLANETARY GEAR

a.
A081167

Remove the 3 planetary gears from the starter drive housing.