This DTC is output when the submersion circuit monitor inside the main body ECU detects that the vehicle has been submerged in water.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2277 | Submersion circuit monitor inside main body ECU detects that vehicle is submerged in water | Main body ECU |
Before commencing troubleshooting, check if the main body ECU is wet. If it is, replace the main body ECU.
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the tester ON.
Clear the DTCs.
Check whether DTC B2277 recurs 30 seconds or more after the ignition switch is turned on (IG).
No DTC is output.
OK
NG