CHECK DTC
Connect the GTS to the DLC3.
Turn the engine switch on (IG) and turn the GTS ON.
Select the following menu items: Body Electrical / Body ECU / DTC.
Check for DTCs and write them down.
For further information about using the GTS, refer to the instruction manual.
Confirm the details of the DTCs.
CLEAR DTC
Connect the GTS to the DLC3.
Turn the engine switch on (IG) (do not start the engine) and turn the GTS ON.
Select the following menu items: Body Electrical / Body ECU / DTC / Clear.
Refer to the GTS operator's manual for further details.
Erase DTCs by pressing the YES button on the tester.
For further information about using the GTS, refer to the instruction manual.