Home › Engine / Hybrid System › 2AZ-FE STARTING › PUSH-BUTTON START
RM24M0E _51 Engine / Hybrid System _059575 2AZ-FE STARTING _0292081 PUSH-BUTTON START C

2AZ-FE STARTING  PUSH-BUTTON START  B2277  Detecting Vehicle Submersion  


DESCRIPTION

This DTC is output when the submersion circuit monitor inside the main body ECU detects that the vehicle has been submerged in water.

DTC No. DTC Detection Condition Trouble Area
B2277 Submersion circuit monitor inside main body ECU detects that vehicle is submerged in water Main body ECU

CAUTION / NOTICE / HINT

HINT:

Before commencing troubleshooting, check if the main body ECU is wet. If it is, replace the main body ECU.


PROCEDURE

1.CHECK WHETHER DTC OUTPUT RECURS
a.

Connect the GTS to the DLC3.


b.

Turn the engine switch on (IG) and turn the tester ON.


c.

Clear the DTCs.


d.

Check whether DTC B2277 recurs 30 seconds or more after the engine switch is turned on (IG).

OK:

No DTC is output.




OK

END (SYSTEM IS OK)

NG

REPLACE MAIN BODY ECU