Each of the push-button start's warnings use the warning buzzer in the combination meter to alert the driver.
The combination meter repeatedly sounds the warning buzzer when one of the following occurs: 1) the activation conditions for the push-button start warning are met, or 2) the certification ECU sends a warning buzzer signal via the CAN communication line to the combination meter (meter ECU).
Check that the engine starts.
The engine starts when the correct warning buzzer signal is transmitted from the steering lock ECU to the combination meter.
Engine can be started.
OK
NG
Place the door control transmitter in an undetectable area outside the vehicle, and turn the engine switch on (IG) with all doors closed.
Warning buzzer sounds once.
OK
NG