Home › Engine / Hybrid System › 2GR-FE CHARGING › CHARGING SYSTEM
RM24M0E _51 Engine / Hybrid System _059577 2GR-FE CHARGING _0292085 CHARGING SYSTEM J

2GR-FE CHARGING  CHARGING SYSTEM  Charge Warning Light Comes ON while Driving  


PROCEDURE

1.CHECK LOCK FUNCTION OF CLUTCH PULLEY
a.

Check the lock function with the pulley installed in the vehicle.

i.

Visually check that the rotor in the generator operates with the engine started.



b.

Check the lock function with the pulley removed from the vehicle.

i.

Remove the generator pulley cap. Using SST, hold the generator rotor.


ii.
A128078E01
0.583,0.552 0.899,0.694 0.316,0.142 10 Free 2.53,0.552 2.845,0.694 0.316,0.142 10 Lock

Turn the clutch pulley clockwise and check that the outer ring locks.

OK:

The outer ring locks.




SST
09820-63020  


OK

2.CHECK LOCK OF CLUTCH PULLEY

NG

REPLACE CLUTCH PULLEY

2.CHECK LOCK OF CLUTCH PULLEY
a.

Start the engine and visually check for looseness of the clutch pulley.

OK:

The clutch pulley is not loose.




OK

REPLACE GENERATOR ASSEMBLY

NG

TIGHTEN CLUTCH PULLEY TO THE SPECIFIED TORQUE