Home › Drivetrain › U241E (AUTOMATIC TRANSMISSION / TRANSAXLE) › SECOND BRAKE PISTON
RM24M0E _52 Drivetrain _059578 U241E AUTOMATIC TRANSMISSION / TRANSAXLE _0292090 SECOND BRAKE PISTON A

U241E AUTOMATIC TRANSMISSION / TRANSAXLE  SECOND BRAKE PISTON  DISASSEMBLY  


PROCEDURE

Hide 35608 1.REMOVE 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY

a.
D003796E18
2.25,0.427 2.708,0.271 false 2.74,0.177 3.031,0.354 0.292,0.177 10 false SST

Place SST on the return spring and compress.

SST
09387-00060  


b.

Using a screwdriver, pry out the snap ring.


c.
C083462

Remove the piston return spring.


Hide 35608 2.INSPECT 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY

Hide 35624 3.REMOVE 2ND BRAKE PISTON

a.
C083463

Hold the 2nd brake piston and apply compressed air (392 kPa, 4.0 kgf/cm2, 57 psi) to the 2nd brake cylinder to remove the 2nd brake piston.


Hide 35624A 4.REMOVE 2ND BRAKE PISTON O-RING

a.
C083465

Remove the 2 O-rings from the 2nd brake piston.