Home › Drivetrain › U241E (AUTOMATIC TRANSMISSION / TRANSAXLE) › SECOND BRAKE PISTON
RM24M0E _52 Drivetrain _059578 U241E AUTOMATIC TRANSMISSION / TRANSAXLE _0292090 SECOND BRAKE PISTON A

U241E AUTOMATIC TRANSMISSION / TRANSAXLE  SECOND BRAKE PISTON  REASSEMBLY  


PROCEDURE

Hide 35624A 1.INSTALL 2ND BRAKE PISTON O-RING

a.
C083465

Coat 2 new O-rings with ATF and install them into the 2nd brake piston.


Hide 35624 2.INSTALL 2ND BRAKE PISTON

a.
C083464

Press in the 2nd brake piston into the 2nd brake cylinder with your hands.


Hide 35608 3.INSTALL 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY

a.
C083462

Install the piston return spring.


b.
D003796E19
2.25,0.458 2.708,0.302 false 2.74,0.219 3.031,0.396 0.292,0.177 10 false SST

Place SST on the piston return spring, and compress the piston return spring with a press.

SST
09387-00060  


c.

Using a screwdriver, install the snap ring.

NOTICE:

Be sure the end gap of the snap ring is not aligned with the piston return spring claw.