1.INSPECT UNDERDRIVE PLANETARY GEAR PRELOAD
34301F
2.REMOVE CYLINDRICAL ROLLER BEARING RACE INNER
Using SST, loosen the staked part of the nut.
Clamp the underdrive planetary gear in soft jaw vise.
Be careful not to damage the differential drive pinion.
Using SST, remove the lock nut.
Using SST, remove the cylindrical roller bearing inner race.
34330
3.REMOVE UNDERDRIVE PLANETARY GEAR ASSEMBLY
Using SST and a press, remove the differential drive pinion, parking lock gear, counter driven gear with underdrive planetary ring gear and front tapered roller bearing.
Clamp the underdrive planetary gear in soft jaw vise.
Using SST, remove rear tapered roller bearing from the underdrive planetary gear.
34341
4.REMOVE UNDERDRIVE PLANETARY RING GEAR
Using snap ring pliers, remove the snap ring.
Remove the underdrive planetary ring gear from the counter driven gear.