Home › Drivetrain › U241E (AUTOMATIC TRANSMISSION / TRANSAXLE) › DIFFERENTIAL CASE
RM24M0E _52 Drivetrain _059578 U241E AUTOMATIC TRANSMISSION / TRANSAXLE _0292095 DIFFERENTIAL CASE A

U241E AUTOMATIC TRANSMISSION / TRANSAXLE  DIFFERENTIAL CASE  DISASSEMBLY  


PROCEDURE

Hide 41221 1.REMOVE FRONT DIFFERENTIAL RING GEAR

a.
C083132E10
1.76,1.521 0.948,1.833 0.948,1.833 1.76,1.625 true 0.146,1.75 0.969,1.906 0.823,0.156 10 false Matchmarks

Place the matchmarks on the ring gear and differential case.


b.
C083133

Remove the 10 bolts.


c.
C083134

Using a plastic-faced hammer, tap on the ring gear to remove it from the case.


Hide 41311E 2.REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING

a.
D025211E08
2.177,0.906 2.646,1.094 2.646,1.094 1.76,1.469 true 2.698,1.01 3.01,1.167 0.313,0.156 10 false SST

Using SST, remove the front differential case tapered roller bearing front inner race from the differential case.

SST
09950-40011  (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011)
09950-60010  (09951-00340)


b.
D025212E07
0.802,0.479 0.625,0.344 false 0.344,0.229 0.635,0.406 0.292,0.177 10 false SST

Using SST, remove the front differential case tapered roller bearing front outer race and differential case washer.

SST
09387-00041  (09387-01030, 09387-01040, 09387-02010, 09387-02020)


Hide 41311F 3.REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING

a.
D025213E07
2.208,0.813 2.802,1.073 2.802,1.073 1.74,1.552 true 2.844,1 3.135,1.177 0.292,0.177 10 false SST

Using SST, remove the front differential case tapered roller bearing rear inner race from the differential case.

SST
09950-40011  (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04061, 09957-04010, 09958-04011)
09950-60010  (09951-00340)


b.
D025214E09
1.24,0.583 2.198,0.521 2.198,0.521 1.156,1.656 true 2.25,0.438 2.542,0.615 0.292,0.177 10 false SST

Using SST, remove the front differential case tapered roller bearing rear outer race from the differential case washer.

SST
09387-00041  (09387-01030, 09387-01040, 09387-02010, 09387-02020)


Hide 41342A 4.REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

a.
C059843

Using a punch and hammer, loosen the staked part of the differential case.


b.
C059998

Using a pin punch (5 mm), tap out the pin from the ring gear side.


Hide 41342F 5.REMOVE NO. 1 FRONT DIFFERENTIAL PINION SHAFT

a.
C083135

Remove the front differential pinion shaft from the differential case.


Hide 41331F 6.REMOVE FRONT DIFFERENTIAL SIDE GEAR

a.
C083136

Remove the 2 front differential pinions, 2 pinion thrust washers, 2 front differential side gears and 2 side gear thrust washers from the differential case.


Hide 41141H 7.REMOVE DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL

a.
D025600E06
1.542,1.26 2.51,1.823 true 2.552,1.771 2.885,1.938 0.333,0.167 10 false SST

Place the transaxle case in a vise.


b.

Using SST, remove the oil seal.

SST
09308-00010  


Hide 35111D 8.REMOVE TRANSAXLE HOUSING OIL SEAL

a.
D025599E08
1.656,1.229 2.448,1.594 true 2.5,1.542 2.854,1.708 0.354,0.167 10 false SST

Place the transaxle housing in a vise.


b.

Using SST, remove the oil seal.

SST
09308-00010