Home › Drivetrain › U241E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSAXLE FLUID
RM24M0E _52 Drivetrain _059578 U241E AUTOMATIC TRANSMISSION / TRANSAXLE _0292097 AUTOMATIC TRANSAXLE FLUID G

U241E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE FLUID  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK TRANSAXLE FLUID LEVEL

HINT:

Drive the vehicle so that the engine and transaxle are at normal operating temperature.


Fluid temperature:

70 to 80°C (158 to 176°F)


a.
D025120E23
1.792,0.052 2.375,0.354 0.583,0.302 10 false OK if hot 0.76,0.781 1.396,1.104 0.635,0.323 10 false Add if hot

Park the vehicle on a level surface and apply the parking brake.


b.

With the engine idling and the brake pedal depressed, move the shift lever to each position from P to L position, and return it to the P position.


c.

Take out the ATF dipstick and wipe it clean.


d.

Fully push the dipstick back into the pipe.


e.

Take it out and check that the fluid level is at the HOT position.

If there are leaks, it is necessary to repair or replace O-rings, FIPGs, oil seals, plugs and/or other parts.

CAUTION:

Wear gloves when working.