82125J
1.INSPECT TRANSMISSION WIRE
Disconnect the B27 wire connector.
Measure the resistance of the transmission wire.
| Tester Connection | Specified Condition |
|---|---|
| 1 (THO) - 6 (E2) | 90 Ω to 156 kΩ |
| 1 (THO) - Body ground | 1 MΩ or higher |
| 6 (E2) - Body ground | 1 MΩ or higher |
If the resistance is not as specified for either of the ATF temperatures shown in the table below, the drivability of the vehicle may decrease.
| ATF Temperature | Specified Condition |
|---|---|
| 10°C (68°F) | 6.4 kΩ |
| 110°C (230°F) | 0.2 kΩ |