1.INSPECT SHIFT LEVER POSITION
When moving the lever from P to the R position with the ignition switch on (IG) and the brake pedal depressed, make sure that the shift lever moves smoothly and moves correctly into position.
Start the engine and make sure that the vehicle moves forward when moving the lever from N to the D position and moves rearward when moving the lever to the R position.
If the operation cannot be performed as specified, inspect the park/neutral position switch assembly and check the shift lever assembly installation condition.
2.ADJUST SHIFT LEVER POSITION
Move the shift lever to the N position.
Using a screwdriver, pull the lock piece out from the adjuster case.
Press in and lock the lock piece to the adjuster case.
Securely press in the lock piece until the lock engages.
After the adjustment, inspect the shift lever by manually operating it and checking that each position is normal. If a problem is found, perform the adjustment again.