35974
1.INSTALL LOWER POSITION INDICATOR HOUSING
Install the housing in the direction indicated by the arrow in the illustration and attach the 2 claws.
Connect the connector to the housing.
35975
2.INSTALL POSITION INDICATOR SLIDE COVER WITH NO. 2 POSITION INDICATOR SLIDE COVER
Install the No. 2 slide cover to the slide cover.
Install the position indicator slide cover with No. 2 slide cover.
35971A
3.INSTALL UPPER POSITION INDICATOR HOUSING
Install the housing and attach the 4 claws.
Clamp the wire to the housing with the cable tie.