Home › Drivetrain › U241E (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LEVER(for RHD) › from 2016.05
RM24M0E _52 Drivetrain _059578 U241E AUTOMATIC TRANSMISSION / TRANSAXLE _0292110 SHIFT LEVER(for RHD) A

U241E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER(for RHD)  REASSEMBLY  


PROCEDURE

Hide 35974 1.INSTALL LOWER POSITION INDICATOR HOUSING

a.
C358320

Install the lower position indicator housing as shown in the illustration and engage the 2 claws.


b.
C358319

Engage the claw to install the connector case to the shift lock control unit assembly.


Hide 35976 2.INSTALL NO. 2 POSITION INDICATOR SLIDE COVER

a.
C356809

Install the No. 2 position indicator slide cover to the position indicator slide cover.


Hide 35975 3.INSTALL POSITION INDICATOR SLIDE COVER

a.
C356804

Install the position indicator slide cover to the shift lock control unit assembly.


Hide 35971A 4.INSTALL UPPER POSITION INDICATOR HOUSING

a.
C356803E01
0.163,0.099 0.435,0.307 0.272,0.208 10 *a 0.163,1.818 0.435,2.026 0.272,0.208 10 *b

Install the upper position indicator housing to the shift lock control unit assembly and engage the 4 claws.

Text in Illustration
*a Left Side
*b Right Side


b.
C356802

Clamp the wire to the upper position indicator housing with a new cable tie.


Hide 85903 5.INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY

a.
C137670

Engage the 3 claws to install the shift lock control ECU sub-assembly to the shift lock control unit assembly.


b.
C358317

Connect the shift lock solenoid connector.