Home › Drivetrain › U660E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSAXLE SYSTEM
RM24M0E _52 Drivetrain _059579 U660E AUTOMATIC TRANSMISSION / TRANSAXLE _0292111 AUTOMATIC TRANSAXLE SYSTEM U

U660E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  FAIL-SAFE CHART  


FAIL-SAFE


This function minimizes the loss of operation when any abnormality occurs in a sensor or solenoid.

Fail-safe Control List:
Malfunction Part Function
Input Turbine Speed Sensor Shifting to only either the 1st or 3rd gear is allowed.
Counter Gear Speed Sensor
·

The counter gear speed is determined based on the signals from the skid control ECU (speed sensor signals).

·

Shifting between 1st to 4th gears is allowed.


ATF Temp. Sensor Shifting between 1st to 4th gears is allowed.
TCM
Power Supply (Voltage is Low)
When the vehicle is being driven in 6th gear, the transaxle is stuck in 6th gear. When being driven in any of the 1st to 5th gears, the transaxle is stuck in 5th gear.
CAN Communication Shifting to only either 1st or 3rd gear is allowed.
Knock Sensor Shifting between 1st to 4th gears is allowed.
Solenoid Valve SL1, SL2, SL3 and SL4 The current to the failed solenoid valve is cut off and operating the other solenoid valves with normal operation performs shift control. (Shift controls in fail-safe mode are described in the table below. For details, refer to Fail-Safe Control Chart.)

Solenoid Valve Operation when Normal:
Gear Position 1st 2nd 3rd 4th 5th 6th
Solenoid SL1 ON ON ON ON OFF OFF
SL2 OFF OFF OFF ON ON ON
SL3 OFF ON OFF OFF OFF ON
SL4 OFF OFF ON OFF ON OFF

Fail-safe Control Chart:
Gear Position in Normal Operation 1st 2nd 3rd 4th 5th 6th
SL1 ON Malfunction (without Fail-safe Control)*1 1st 2nd 3rd 4th 4th 4th
OFF Malfunction (without Fail-safe Control) 1st to N 2nd to N 3rd to N 4th to N 5th 6th
Fail-safe Control during OFF Malfunction Stuck in 3rd or 5th
Fail-safe Control during OFF Malfunction (ATF Pressure Switches 1 and 2 Malfunctions) Stuck in 3rd or 5th
SL2 ON Malfunction (without Fail-safe Control)*1 1st to 4th 2nd to 4th 3rd to 4th 4th 5th 6th
OFF Malfunction (without Fail-safe Control) 1st 2nd 3rd 4th to 1st 5th to N 6th to N
Fail-safe Control during OFF Malfunction 1st 2nd 3rd 3rd 3rd 3rd
Fail-safe Control during OFF Malfunction (ATF Pressure Switches 1 and 2 Malfunctions) Stuck in 2nd or 3rd
SL3 ON Malfunction (without Fail-safe Control)*1 1st to 2nd 2nd 3rd 4th 5th 6th
OFF Malfunction (without Fail-safe Control) 1st 2nd to 1st 3rd 4th 5th 6th to N
Fail-safe Control during OFF Malfunction 1st 3rd 3rd 4th 5th 5th
Fail-safe Control during OFF Malfunction (ATF Pressure Switches 1 and 2 Malfunctions) Stuck in 3rd
SL4 ON Malfunction (without Fail-safe Control)*1 3rd 3rd 3rd 4th 5th 5th
OFF Malfunction (without Fail-safe Control) 1st 2nd 3rd to 1st 4th 5th to N 6th
Fail-safe Control during OFF Malfunction 1st *2 2nd *2 4th*2 4th*2 6th 6th
Fail-safe Control during OFF Malfunction (ATF Pressure Switches 1 and 2 Malfunctions) Stuck in 2nd

*1: Fail-safe control is not actuated when the ON malfunction occurs.

*2: Shifting to 5th and 6th gears is prohibited.