1.INSPECT ATF TEMPERATURE SENSOR ASSEMBLY
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Specified Condition |
|---|---|
| E2 - THO1 | 90 Ω to 156 kΩ |
| E2 - Body ground | 10 kΩ or higher |
| THO1 - Body ground | 10 kΩ or higher |
If the resistance is out of the specified range with the ATF temperature shown in the table below, the driveability of the vehicle may decrease.
| ATF Temperature | Specified Condition |
|---|---|
| 10°C (50°F) | 5.8 to 7.1 kΩ |
| 110°C (230°F) | 0.23 to 0.26 kΩ |
If the result is not as specified, replace the ATF temperature sensor assembly.