Home › Drivetrain › U660E (AUTOMATIC TRANSMISSION / TRANSAXLE) › VALVE BODY ASSEMBLY
RM24M0E _52 Drivetrain _059579 U660E AUTOMATIC TRANSMISSION / TRANSAXLE _0292116 VALVE BODY ASSEMBLY A

U660E AUTOMATIC TRANSMISSION / TRANSAXLE  VALVE BODY ASSEMBLY  REMOVAL  


PROCEDURE

Hide 30500 1.REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

Hide 35106D 2.REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

a.
C356366

Remove the 18 bolts and oil pan from the transaxle.

NOTICE:

Some fluid will remain in the oil pan. Remove all the pan bolts, and carefully remove the oil pan assembly.



b.

Remove the gasket from the oil pan.


c.
C134963E02
2.743,0.137 3.248,0.302 0.505,0.165 10 Magnet 2.681,0.215 1.884,0.215 1.884,0.215 1.884,1.446 false 2.45,0.996 2.45,0.215 false

Remove the 2 magnets from the oil pan.


d.
AT00103

Examine particles in the oil pan.

i.

Collect any steel chips with the removed magnets. Look carefully at the chips and particles in the oil pan and on the magnets to see the type of wear which might be found in the transaxle.

Result:
Steel (magnetic):

Bearing, gear and plate wear

Brass (non-magnetic):

Bearing wear




Hide 35330 3.REMOVE VALVE BODY OIL STRAINER ASSEMBLY

a.
C136687

Remove the 2 bolts and oil strainer from the valve body.


b.
C136688E09
1.802,0.375 2.042,0.375 false 2.083,0.292 2.563,0.469 0.479,0.177 10 false O-Ring

Remove the O-ring from the oil strainer.


Hide 35410 4.REMOVE TRANSMISSION VALVE BODY ASSEMBLY

a.
C136689

Remove the 11 bolts and valve body from the transaxle.

NOTICE:

When removing the transmission valve body assembly, be careful not to allow the transmission revolution sensor and the transaxle case to interfere with each other.



Hide 35418 5.REMOVE MANUAL VALVE

a.
C138517

Remove the manual valve from the valve body.