Home › Drivetrain › U660E (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LEVER › 2013.04–2016.05
RM24M0E _52 Drivetrain _059579 U660E AUTOMATIC TRANSMISSION / TRANSAXLE _0292128 SHIFT LEVER N

U660E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  ADJUSTMENT  


PROCEDURE

Hide 1.INSPECT SHIFT LEVER POSITION

a.

When moving the lever from the P to the R position with the engine switch on (IG) and the brake pedal depressed, make sure that the shift lever moves smoothly and moves correctly into position.


b.

Start the engine and make sure that the vehicle moves forward when moving the lever from the N to the D position and moves rearward when moving the lever to the R position.

If the operation cannot be performed as specified, inspect the park/neutral position switch assembly and check the shift lever assembly installation condition.


Hide 2.ADJUST SHIFT LEVER POSITION

a.

Move the shift lever to the N position.


b.
C133024E04
2.26,1.938 1.719,1.417 true 2.323,1.927 3.073,2.135 0.75,0.208 10 false Lock Piece

Using a screwdriver, pull the lock piece out from the adjuster case.


c.

Press in and lock the lock piece to the adjuster case.

NOTICE:

Securely press in the lock piece until the lock engages.



d.

After the adjustment, inspect the shift lever by manually operating it and checking that each position is normal. If a problem is found, perform the adjustment again.