Home › Suspension › SUSPENSION › FRONT LOWER BALL JOINT
RM24M0E _53 Suspension _059582 SUSPENSION _0292144 FRONT LOWER BALL JOINT G

SUSPENSION  FRONT LOWER BALL JOINT  INSPECTION  


PROCEDURE

Hide 43340A 1.INSPECT FRONT LOWER BALL JOINT ASSEMBLY LH

C133569

a.

Move the ball joint stud back and forth 5 times as shown in the illustration, before installing the nut.


b.

Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take the torque reading on the fifth turn.

Standard turning torque:

0.98 to 3.43 N*m (10 to 35 kgf*cm, 9 to 30 in.*lbf) or less



c.

Check for any cracks and grease leaks on the ball joint dust cover.