Home › Suspension › SUSPENSION › REAR SHOCK ABSORBER
RM24M0E _53 Suspension _059582 SUSPENSION _0292145 REAR SHOCK ABSORBER N

SUSPENSION  REAR SHOCK ABSORBER  DISPOSAL  


PROCEDURE

Hide 48540 1.DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY LH

C138580

a.

Fully extend the shock absorber rod, and clamp it in a vise at an angle.


b.

Using a drill, make a hole near the center of the cylinder in the hatched area shown in the illustration to discharge the gas inside.

CAUTION:

As metal debris may be blown outward by the gas, you must:

·

Wear protective glasses.

·

Cover the area being cut.

NOTICE:

The gas is colorless, odorless and harmless.