Home › Suspension › SUSPENSION › FRONT SHOCK ABSORBER
RM24M0E _53 Suspension _059582 SUSPENSION _0292150 FRONT SHOCK ABSORBER N

SUSPENSION  FRONT SHOCK ABSORBER  DISPOSAL  


PROCEDURE

Hide 48520 1.DISPOSE OF FRONT SHOCK ABSORBER ASSEMBLY LH

a.

Fully extend the shock absorber piston rod, and clamp it in a vise at an angle.


b.

Using a drill or similar tool, gradually make a hole in area A to discharge the gas inside of the absorber.

CAUTION:

As metal debris may be blown outward by the gas, you must:

·

Wear protective glasses.

·
C335183E01
1.98,2.797 2.181,2.962 0.202,0.164 10 A 1.98,0.408 2.181,0.573 0.202,0.164 10 A 0.059,2.348 2.002,2.608 1.943,0.260 12 Shock Absorber Type B: 0.059,0.028 2.087,0.288 2.029,0.260 12 Shock Absorber Type A:

Cover the area being cut.

NOTICE:

The gas is colorless and harmless.