Home › Suspension › SUSPENSION › FRONT SHOCK ABSORBER
RM24M0E _53 Suspension _059582 SUSPENSION _0292150 FRONT SHOCK ABSORBER A

SUSPENSION  FRONT SHOCK ABSORBER  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the RH side and LH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 48687B 1.REMOVE FRONT SUSPENSION SUPPORT PLATE LH

a.

Remove the plate from the shock absorber.


Hide 48680A 2.REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT

a.
C265530E06
2.365,0.99 2.635,0.99 false 2.688,0.906 3,1.083 0.313,0.177 10 false SST

Secure SST in a vise.

SST
09727-30021  (09727-00010, 09727-00021, 09727-00031)


b.
C275706E14
0.14,0.089 0.650,0.264 0.510,0.175 10 Correct 0.14,2.421 0.764,2.596 0.624,0.175 10 Incorrect

Attach the arms of SST to the diameter of the front coil spring.

CAUTION:
·

Make sure that the front coil spring is installed so that the distance between the upper and lower arms of SST is at the maximum.

·

Make sure that the claws of the arms are securely attached.




c.

Using SST, compress the front coil spring.

CAUTION:
·

If the front coil spring bends during compression, immediately stop compression and reinstall SST.

·

Do not excessively compress the front coil spring so that the coils contact each other.

·

Do not use an impact wrench. It will damage SST.




d.
C265531

Confirm that the front coil spring becomes free and remove the front support to front shock absorber nut.

CAUTION:

Do not remove the front support to front shock absorber nut when the front coil spring is not free.



Hide 3.REMOVE COLLAR

a.

Remove the collar from the suspension support.


Hide 48609 4.REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY LH

a.

Remove the suspension support from the shock absorber.


Hide 48619A 5.REMOVE STRUT MOUNTING BEARING LH

a.

Remove the mounting bearing from the suspension support.


Hide 48471C 6.REMOVE FRONT COIL SPRING SEAT UPPER LH (Shock Absorber Type A)

Hide 48157C 7.REMOVE FRONT COIL SPRING INSULATOR UPPER LH (Shock Absorber Type A)

a.

Remove the insulator upper from the shock absorber.


Hide 8.REMOVE FRONT SPRING SEAT SUB-ASSEMBLY WITH INSULATOR LH (Shock Absorber Type B)

a.
C319832E05
1.469,1.583 0.771,1.719 0.771,1.719 0.708,1.719 false 1.781,1.5 1.677,1.875 1.677,1.875 1.458,1.448 false 0.5,1.615 0.823,1.885 0.323,0.271 10 false *a 1.604,1.948 1.927,2.125 0.323,0.177 10 false *b

Disengage the front spring seat sub-assembly with insulator from the claws of the front shock absorber assembly.

*a Front Spring Seat Sub-assembly with Insulator
*b Claw


b.

Remove the front spring seat sub-assembly with insulator from the front shock absorber assembly.


Hide 48331C 9.REMOVE FRONT SPRING BUMPER LH

a.

Remove the spring bumper from the shock absorber.


Hide 48132 10.REMOVE FRONT COIL SPRING LH

a.

Remove the coil spring from the shock absorber.


b.

Remove SST from the coil spring.


Hide 48158C 11.REMOVE FRONT COIL SPRING INSULATOR LOWER LH

a.

Remove the insulator lower from the shock absorber.